Disclosure: This post may contain affiliate links.

Best Raspberry Pi Kits for Kids and Teenagers (2021)

Find the best Raspberry Pi Kits for Kids and Teenagers, along with what you need for starting a project.

Raspberry Pi 3B+ Praveen Thirumurugan / Unsplash

Last Updated: October 25, 2021

Written by Brandon Jones

Raspberry Pi was developed to promote the teaching of basic computer science. These devices are a series of small computers made on a single board which is excellent for various programming projects. The small and portable form factor allows for more ways to express creativity in how you use it. With the smaller size and lower-end hardware, the cost of owning a computer for projects is also reduced.

There are many different Raspberry Pi devices and kits, but I'll help you find the best one for your kids and teenagers.

Remember also to check the Required Items to Start section below to make sure you have everything you need.

Best Raspberry Pi Kits for Kids and Teenagers

Section Link

Choosing the best Raspberry Pi for kids or teenagers depends on what appeals to them most and how much flexibility you want for their projects. Read through the descriptions of each to see what best fits their needs.

Raspberry Pi 400 All-in-One

The Raspberry Pi 400 is the best out of the three. It has a slightly faster processor than the Raspberry Pi 4 Model B. It also runs marginally cooler due to the narrow board design. This one is the easiest to get up and running, as it has Raspberry Pi OS pre-loaded and is fully assembled. The Raspberry Pi board is built into the keyboard, which makes it very portable. There is no assembly required, so this is a good choice if you want something easier to get started on projects right away.

  • 1.8 GHz quad-core 64-bit processor
  • 4 GB RAM
  • The "case" is also the keyboard
  • It comes with a mouse, 16 GB microSD card pre-loaded with Raspberry Pi OS, power supply, 3 ft micro HDMI to HDMI A Cable, and a beginner's guide
  • Supports dual-band (2.4GHz and 5.0GHz) Wi-Fi
  • Bluetooth 5.0
  • Gigabit Ethernet port
  • Two USB 3.0 ports and a USB 2.0 port
  • Two micro-HDMI ports (supports 4k resolution)
  • 40-pin GPIO port
  • Raspberry Pi 400 All-in-One on Amazon (affiliate link). Raspberry Pi 400 All-in-One

Raspberry Pi 4 (Model B) Starter Pro Kit

The Raspberry Pi 4 Model B is great if you don't want the keyboard of the Raspberry Pi 400 but want something faster with more flexibility than the Raspberry Pi Zero W. This Raspberry Pi requires some assembly, so if they want the experience of putting their project together, it's a good choice. Plus, it's easier to customize if they're going to modify it later.

  • 1.5 GHz quad-core 64-bit processor
  • 4 GB RAM
  • It comes with a black case, fan, power switch, heat sinks, 6 ft micro HDMI cable, power supply, a 32GB microSD card, and a microSD card reader
  • Supports dual-band (2.4GHz and 5.0GHz) Wi-Fi
  • Bluetooth 5.0
  • Gigabit Ethernet port
  • Two USB 3.0 ports and two USB 2.0 ports
  • Two micro-HDMI ports (supports 4k resolution)
  • Included microSD card comes with "New Out Of Box Software" (NOOBS) for installing Raspberry Pi OS.
  • 40-pin GPIO port
  • Raspberry Pi 4 Starter Pro Kit on Amazon (affiliate link). Raspberry Pi 4 Starter PRO Kit

Raspberry Pi Zero W (Wireless) Starter Kit

The Raspberry Pi Zero W is the lowest-cost and smallest kit option that's good for starting out. It has a slower processor along with less RAM than the other two. This Raspberry Pi is useful for projects such as robots since it requires less power. However, having fewer ports and lower speeds than the other Raspberry Pi devices may not have as much flexibility for a broader range of projects.

  • 1 GHz single-core processor
  • 512MB RAM
  • It comes with a white/red case (3 interchangeable lids), 16 GB microSD card, USB OTG adapter, mini HDMI adapter, heat sink, and power supply
  • Supports dual-band (2.4GHz and 5.0GHz) Wi-Fi
  • Bluetooth 4.1
  • No Ethernet port
  • One micro-HDMI port (720p resolution or below recommended)
  • One micro USB port
  • Included microSD card comes with "New Out Of Box Software" (NOOBS) for installing Raspberry Pi OS.
  • 40-pin GPIO port
  • Raspberry Pi Zero W (Wireless) Starter Kit on Amazon (affiliate link). Raspberry Pi Zero W (Wireless) Starter Kit

Required Items to Start

Section Link

Some Raspberry Pi kits include most items that are required for starting. With that said, it's best to make sure you have all that you need.

Below is a list of all that is required to begin. I've also included some recommended products to make it easier to choose.

USB Power Adapter

Depending on the model, you will need either a micro USB or USB C power adapter to use your Raspberry Pi. The Raspberry Pi 4B uses a USB C power adapter. The Raspberry Pi Zero W uses a micro USB power adapter.

Raspberry Pi 4B Power Supply on Amazon (affiliate link)

Raspberry Pi Zero W Power Supply on Amazon (affiliate link)

MicroSD Card

Lower capacity microSD cards ( 8 GB) will work for most projects, but a 32 GB or higher microSD card is recommended since there's not much price difference. A larger microSD card would allow you to repurpose the Raspberry Pi in the future or use it for multiple tasks.

I recommend the SAMSUNG 32GB microSDHC Card on Amazon (affiliate link) if you don't already have one and aren't getting one in a kit.

Ethernet or Wi-Fi

The Raspberry Pi 400 and 4 Model B both have an Ethernet port and Wi-Fi capability. The Raspberry Pi Zero W only has Wi-Fi.

Using Ethernet, which requires an Ethernet cable, may provide a slightly faster response time for some projects and a more stable connection than Wi-Fi. However, you most likely won't notice much of a difference between the two.

Mouse and Keyboard

To first set up your Raspberry Pi, you will need a USB keyboard and USB mouse. After setting up your Raspberry Pi, you can use a Bluetooth keyboard and mouse if you want to instead.

If you need a keyboard, I recommend Mechanical Keyboards on Amazon (affiliate link) for the most enjoyable experience.

If you need a mouse, I recommend getting a Logitech Wired USB Mouse on Amazon (affiliate link).

TV or Monitor

You will need a TV or monitor to view the Raspberry Pi OS desktop environment.

Check out my other articles for Choosing the Best Monitor for Programming and How to Choose a Gaming Monitor.

HDMI to Micro-HDMI Cable

To connect a display that has an HDMI port to the Raspberry Pi, you will need an HDMI to micro-HDMI cable or adapter.

I recommend the UGREEN 10FT Micro HDMI to HDMI Cable Adapter 4K 60Hz on Amazon (affiliate link) if you don't already have one and aren't getting one in a kit.

Headphones or Speakers

If your project involves anything with sound, you will need either Bluetooth headphones or speakers.

I recommend the OontZ Angle 3 Bluetooth Portable Speaker on Amazon (affiliate link) if you want a small Bluetooth speaker.

If you want some headphones, check out my other article: Are Noise-Cancelling Headphones Worth the Added Expense?

A Case

If you aren't getting a Raspberry Pi kit, which includes a case, you may want one to provide protection and easier portability. Getting a case is optional, and your Raspberry Pi will still be usable without one.

Keep in mind that there are different versions of cases depending on which model of Raspberry Pi you are going to get.

Raspberry Pi 4 Model B Cases on Amazon (affiliate link).

Raspberry Pi Zero W Cases on Amazon (affiliate link).